DOUBLE DIAPHRAGM PUMPS


AOD 30 / 1" BSP (25mm)
POLYPROPYLENE


ADVANCED PLASTIC PRODUCTS


RANGE OF PRODUCTS IN ADVANCED PLASTICS

 
Home Products Applications Downloads Contact Us Enquiry



Advanced Plastics

  • PLASTIC HAND PUMP
  • 'QVF' FLANGES FOR GLASS
  • QUICK CHANGE HOSE COUPLING
    		•
  • PLASTIC HINGES
  • PLASTIC COATED FASTENERS
  • PORTABLE DRUM STIRRER
    		•
  • UNIVERSAL TABLE FLANGES

    • Pioneers In Manufacturing Of Polypropylene Lined Steel Bolts, Nuts, Studs And Precision Molded Machines Screws In India

    Today plastic hardware's are accepted fasteners and are used extensively throughout industry. They are lighter, non - corrosive, non conductive, non - magnetic, non- toxic, and although not as strong. These unique properties mean that they outlast their counter parts (Metal, Plastics, or Glass).



    HALF THREAD VERSION (HT SERIES)
    FULL THREAD VERSION (FT SERIES)





    Range Of Production & Calculation For Plastic + MS / SS Injection Molded Fastners

    1. Available MOC : a) MS Insert + PP Injection Molded
                                  b) MS Insert + PVDF Injection Molded

    2. Available Type : a) Full Threaded – FT Series
                                   b) Half Threaded – HT Series

    Please follow the below given Procedure to measure the correct length of "Daybreak" Fastners. Please Add following margin in MM to your Total Job Thk.

    1. Half Threaded Version – HT Series

  • BOLTS ONLY

    •
    Dia
    Available Length
    Margin to be added in mm
    Washer
    5/8"
    Upto 6"
    Add 20 mm to your Job Thk
    One Washer
    9/16"
    Upto 6"
    Add 20 mm to your Job Thk
    One Washer
    1/2"
    Upto 6"
    Add 20 mm to your Job Thk
    One Washer
    3/8"
    Upto 6"
    Add 20 mm to your Job Thk
    One Washer

  • STUDS ONLY

    • Dia
    Available Length
    Margin to be added in mm
    Washer
    1"
    Upto 3 Meter
    Add 30 mm each side - Total 60 mm
    Two Washer
    3/4"
    Upto 3 Meter
    Add 30 mm each side - Total 60 mm
    Two Washer
    5/8"
    Upto 3 Meter
    Add 30 mm each side - Total 60 mm
    Two Washer
    1/2"
    Upto 1 Meter
    Add 20 mm each side - Total 40 mm
    Two Washer
    3/8"
    Upto 1 Meter
    Add 20 mm each side - Total 40 mm
    Two Washer
    5/16"
    Upto 1 Meter
    Add 20 mm each side - Total 40 mm
    Two Washer

    2. Full Threaded Version - FT Series

  • BOLTS ONLY

    • Dia
    Available Length
    Margin to be added in mm
    Washer
    3/4"
    Upto 6"
    Add 30 mm to your Job Thk
    One Washer
    M - 16
    Upto 6"
    Add 30 mm to your Job Thk
    One Washer
    M - 12
    Upto 6"
    Add 30 mm to your Job Thk
    One Washer
    3/8"
    Upto 6"
    Add 30 mm to your Job Thk
    One Washer
    M - 8
    Upto 4 - 3/4"
    Add 15 mm to your Job Thk
    One Washer

  • STUDS ONLY

    • Dia
    Available Length
    Margin to be added in mm
    Washer
    M - 24
    Upto 3 Meter
    Add 40 mm each Side - Total 80 mm
    Two Washer
    3/4"
    Upto 3 Meter
    Add 35 mm each Side - Total 70 mm
    Two Washer
    M - 16
    Upto 3 Meter
    Add 30 mm each Side - Total 60 mm
    Two Washer
    M - 12
    Upto 3 Meter
    Add 30 mm each Side - Total 60 mm
    Two Washer
    3/8"
    Upto 1 Meter
    Add 30 mm each Side - Total 60 mm
    Two Washer


  • Wide choice of materials, type of design and sizes to suit every     applications.


    •
  • Resistant to corrosion.


    •
  • No more cutting of corroded steel nuts and bolts when removing from     chemical equipments, pipelines etc.


    •
  • Easy to reopen without loss of time and labour.


    •
  • Economical against expensive SS Hardware.


    •
  • Daybreak fasteners ensure strength of steel and corrosion resistance of     plastics.


    •
  • Most useful for chemical, acid, dyes & intermediate, steel industries,     electric & electronic, aerospace, marine & automotive industries, plastic     fabricators, plastic pumps & valves manufacturing and environment /     pollution control equipment manufacturers.


    WITH INSERTS

    WITHOUT INSERTS


    • Universally Accepted Hand Operated Moulded Polypropylene Barrel Pump


  • 330 ml capacity for every down stroke.

    •
  • Excellent for transfer of acids, alkalis and other     corrosive chemicals from barrels and jerry cans.


    •
  • Self priming with telescopic suction pipe.


    •
  • Dual treading for steel and plastic drums.


    •
  • Economical light weight and durable.


    •
  • Easy to dismantle, clean & reassemble.





    		•

    Portable Drum Stirrer

    A universal stirrer for 20 to 210 LTR. Drums with small bung hole. Easy to rapid. Ideal for stirring up suspensions and mixing in additives.


    Available in different combinations

    M.O.C : SS - 304, SS -316, PP lined & PVDF lined
    Motor : Electric or Pneumatic
    Impeller : Propeller type and folded blade
    Mounting : Direct mounting or with stand

    With or without double ball bearing designs.

    Pneumatic Stirrer With Folded Blade Fit Easily In The Bung Hole

    Application :
  • It is possible in a matter of seconds to fit the drum mounting on to even     deformed screw cap drums, to insert the stirrer shaft through the     bunghole, center it and secure it in position. Pneumatic drum agitators     are distinguished by their functional design, ease of handling and robust     construction.

  • The powerful air motor permits stirring of dye stuffs, solvents, and even     viscous media effortlessly without constant attention of an operator.

  • The centrifugal agitator inserted through the banghole is inclined to     achieve optimum stirring action in the center of the drum. In addition, it     is possible to incline the stirrer in required degrees to the left or right.


    • Daybreak Glass Filled PP Quick Connect Hose Coupling

  • Injection moulded from glass reinforced polypropylene for better     strength.
  • Lever cam in Nylon, PVDF or SS - 304 - Optional.
  • Suitable available : 25mm(1"), 40mm(1.5"), 50mm(2"), 80mm(3").
  • Most economical compared to metallic couplings.
  • Useful to fertilizer, chemicals , Textile, Transport and Agriculture     Industries.

    Different end connections with different rubber gaskets available on request.


    • Universal Table Flanges & QVF Flanges For Glass Piping

    Available in various sizes & type

  • Injection moulded in PP /GFPP for better strength.
  • Unique design to match D table, F table, and ASA - 150 standard in one     flange and there by reduced inventory.

  • Extra collar provided with Flange (2" and above) gives more strength     and pipe and flanges connection.

  • Heavy Duty.

  • QVF Flanges in GFPP overcome corrosion as well as reduced dead load     to the glass pipeline and thereby reduced of breakage.


    Metal bonded glass filled pp flanges under development.

    Other Products

  • PP Hinges.

  • Various Rubber Gaskets inasl Sizes & Tables.

  • Plastic linning on shaft as per requirement & drawing.

    •
  • Teflon bellow with PP flanges in various sizes.


    		•
    Top